Filter toolsClose filters ×

End Mills for Aluminum

View products ↓

Milling aluminum can be quite different from milling other materials like steel or plastics due to aluminum's unique properties. To achieve the best results when milling aluminum, it's important to use carbide end mills specifically designed for this material. Here are some characteristics that make certain carbide end mills better for milling aluminum compared to standard end mills:

 

Material Selection

Carbide end mills are the preferred choice for milling aluminum. Carbide is harder and more wear-resistant than high-speed steel (HSS), making it suitable for the high-speed machining often used with aluminum.

Flute Geometry

High Helix Angle: Carbide end mills designed for aluminum typically have a high helix angle (often 45 degrees or higher). This helps in efficient chip evacuation and reduces the risk of chip recutting, which can lead to heat buildup and tool wear.

Flute Design

Polished Flutes: Some aluminum-specific carbide end mills have polished or specially coated flutes to minimize built-up edge (BUE) and reduce the tendency of aluminum to stick to the tool.

Number of Flutes

Fewer Flutes:  Carbdie end mills with fewer flutes (typically two or three) are often preferred for aluminum machining. Fewer flutes allow for larger chip evacuation channels and can handle the softer, gummy nature of aluminum better.

Coatings

Choose the coating or finish recommended for the exact tool and aluminum alloy. Check the manufacturer’s application guidance before selecting a coated tool. (see additional coating details here)

Chip Breakers

Some carbide end mills designed for aluminum may have chip breakers or flutes with varying helix angles to help control chip formation and improve surface finish.

Rigidity and Stiffness

The carbide end mill and the milling machine should provide sufficient rigidity and stiffness to prevent vibrations, which can negatively impact surface finish and tool life.

Speeds and Feeds

Proper speeds and feeds are critical when milling aluminum. Aluminum-specific end mills are often optimized for higher speeds and chip loads suited to the material's properties.

Coolant or Lubrication

While aluminum is known for its ability to dissipate heat, using a coolant or lubrication can still help improve tool life and surface finish, especially in high-speed milling operations.

Cutter Geometry

Some carbide end mills designed for aluminum have specialized cutter geometries, such as variable helix or variable pitch designs, to minimize chatter and vibrations.

 

When selecting a carbide end mill for milling aluminum, it's essential to consider the specific requirements of your machining operation, including the type of aluminum alloy, cutting conditions, and desired surface finish. If you would like to discuss your application in more detail please reach out to us at 908-98-ATLAS or email us at Sales@atlascuttingtools.com

 

Compare three aluminum end mill configurations

Check diameter, cutting length, overall length, coating and corner geometry against your setup. These examples have different dimensions and geometries; they are not interchangeable substitutes.

Use the product specifications and manufacturer guidance to confirm the tool for your application.

  • Compare SKU Vendor Size (D1) Shank Diameter (D2) Flute Length (L2) Reach (L3) Neck Dia (D3) Overall Length (L1) Length Type Corner Radius (R) Included Angle Taper Angle Helix Angle Number of Flutes Weldon Flats Flats Coating In Stock Price Quantity
    A41004 ACT 3/4 3/4 1-3/4 4 45° 2 Uncoated 46
    $288.24
  • A76636 ACT 1/4 1/4 1-1/4 3 0.0200 45° 3 Uncoated 13
    $65.85
  • A76477 ACT 1 1 1-1/4 3-1/2 45° 3 ZrN 9
    $545.85
  • A76398 ACT 1/2 1/2 3 6 45° 3 ZrN 20
    $204.83
  • A71617 ACT 1/4 1/4 1/2 2 .020 45° 3 ZRN 10
    $39.99
  • A71599 ACT 1/4 1/4 1/2 2 .020 45° 2 ZRN 60
    $39.99
  • A49845 ACT 3/4 3/4 1-3/4 4 45° 2 ZRN 40
    $305.43
  • A76637 ACT 1/4 1/4 1-1/4 3 0.0300 45° 3 Uncoated 20
    $65.85
  • A76608 ACT 1 1 1-3/4 4 45° 3 Uncoated 16
    $523.13
  • A41126 ACT 5/8 5/8 3/4 3 45° 3 Uncoated 57
    $176.42
  • A55431 ACT 1/4 1/4 3/4 2-1/2 0.02 45° 3 Uncoated 100
    $43.45
  • A55403 ACT 1/4 1/4 3/4 2-1/2 0.02 45° 2 Uncoated 100
    $43.45
  • A41022 ACT 3/4 3/4 2-1/2 5 45° 2 Uncoated 9
    $375.57
  • A76638 ACT 1/4 1/4 1-1/4 3 0.0600 45° 3 Uncoated 24
    $65.85
  • A76486 ACT 1 1 1-3/4 4 45° 3 ZrN 12
    $570.33
  • A76389 ACT 1/4 1/4 3/4 2-1/2 0.0150 (1/64) 45° 2 Uncoated 100
    $43.45
  • A76204 ACT 1/4 1/4 3/4 2-1/2 0.0150 (1/64) 45° 3 Uncoated 100
    $43.45
  • A71612 ACT 5/8 5/8 3/4 3 45° 3 ZRN 14
    $189.66
  • A49873 ACT 3/4 3/4 2-1/2 5 45° 2 ZRN 26
    $394.36
  • A76617 ACT 1 1 2-1/4 5 45° 3 Uncoated 14
    $644.27
  • A76390 ACT 1/4 1/4 3/4 2-1/2 0.0300 45° 2 Uncoated 100
    $43.45
  • A76244 ACT 1/4 1/4 1-1/4 3 0.0150 (1/64) 45° 3 ZrN 5
    $74.41
  • A76205 ACT 1/4 1/4 3/4 2-1/2 0.0300 45° 3 Uncoated 88
    $43.45
  • A41065 ACT 1 1 1-1/4 3-1/2 45° 2 Uncoated 21
    $483.18
  • A49851 ACT 5/8 5/8 1-5/8 3-1/2 45° 3 Uncoated 66
    $198.48
  • A76495 ACT 1 1 2-1/4 5 45° 3 ZrN 12
    $694.98
  • A76391 ACT 1/4 1/4 3/4 2-1/2 0.0600 45° 2 Uncoated 100
    $43.45
  • A76245 ACT 1/4 1/4 1-1/4 3 0.0200 45° 3 ZrN 5
    $74.41
  • A76206 ACT 1/4 1/4 3/4 2-1/2 0.0600 45° 3 Uncoated 81
    $43.45
  • A71596 ACT 1 1 1-1/4 3-1/2 45° 2 ZRN 24
    $384.93
  • A49858 ACT 5/8 5/8 1-5/8 3-1/2 45° 3 ZRN 100
    $212.67
  • A76246 ACT 1/4 1/4 1-1/4 3 0.0300 45° 3 ZrN 5
    $74.41
  • A76136 ACT 1/4 1/4 3/4 2-1/2 0.0150 (1/64) 45° 2 ZrN 77
    $51.99
  • A76021 ACT 1/4 1/4 3/4 2-1/2 0.0150 (1/64) 45° 3 ZrN 45
    $51.99
  • A49879 ACT 5/8 5/8 2-3/8 5 45° 3 Uncoated 59
    $347.32
  • A41005 ACT 1 1 1-3/4 4 45° 2 Uncoated 20
    $507.38
  • A76247 ACT 1/4 1/4 1-1/4 3 0.0600 45° 3 ZrN 8
    $74.41
  • A76137 ACT 1/4 1/4 3/4 2-1/2 0.0300 45° 2 ZrN 67
    $51.99
  • A76022 ACT 1/4 1/4 3/4 2-1/2 0.0300 45° 3 ZrN 33
    $51.99
  • A49886 ACT 5/8 5/8 2-3/8 5 45° 3 ZRN 11
    $363.16
  • A49846 ACT 1 1 1-3/4 4 45° 2 ZRN 15
    $534.38
  • A76500 ACT 5/16 5/16 1/2 2 0.0200 45° 3 Uncoated 14
    $46.06
  • A76138 ACT 1/4 1/4 3/4 2-1/2 0.0600 45° 2 ZrN 81
    $51.99
  • A76023 ACT 1/4 1/4 3/4 2-1/2 0.0600 45° 3 ZrN 62
    $51.99
  • A41127 ACT 3/4 3/4 1 3 45° 3 Uncoated 54
    $268.62
  • A41025 ACT 1 1 2-1/4 5 45° 2 Uncoated 8
    $630.45
  • A76501 ACT 5/16 5/16 1/2 2 0.0300 45° 3 Uncoated 10
    $46.06
  • A71613 ACT 3/4 3/4 1 3 45° 3 ZRN 15
    $284.65
  • A55438 ACT 1/4 1/4 3/4 2-1/2 0.02 45° 3 ZRN 61
    $48.16
  • A55410 ACT 1/4 1/4 3/4 2-1/2 0.02 45° 2 ZRN 21
    $48.16
  • A49874 ACT 1 1 2-1/4 5 45° 2 ZRN 9
    $680.71
  • A76502 ACT 5/16 5/16 1/2 2 0.0600 45° 3 Uncoated 14
    $46.06
  • A55445 ACT 1/4 1/4 1-1/4 3 0.02 45° 3 Uncoated 100
    $61.73
  • A55417 ACT 1/4 1/4 1-1/4 3 0.02 45° 2 Uncoated 54
    $61.73
  • A41206 ACT 3/4 3/4 1-3/4 4 45° 3 Uncoated 100
    $288.24
  • A76350 ACT 1/4 1/4 1-1/4 3 0.0150 (1/64) 45° 2 Uncoated 100
    $61.73
  • A76296 ACT 5/16 5/16 1/2 2 0.0200 45° 3 ZrN 7
    $55.66
  • A76079 ACT 1/4 1/4 1-1/4 3 0.0150 (1/64) 45° 3 Uncoated 100
    $61.73
  • A49859 ACT 3/4 3/4 1-3/4 4 45° 3 ZRN 87
    $305.43
  • A76351 ACT 1/4 1/4 1-1/4 3 0.0300 45° 2 Uncoated 100
    $61.73
  • A76297 ACT 5/16 5/16 1/2 2 0.0300 45° 3 ZrN 12
    $55.66
  • A76080 ACT 1/4 1/4 1-1/4 3 0.0300 45° 3 Uncoated 100
    $61.73
  • A49880 ACT 3/4 3/4 2-1/2 5 45° 3 Uncoated 100
    $375.57
  • A76352 ACT 1/4 1/4 1-1/4 3 0.0600 45° 2 Uncoated 47
    $61.73
  • A76298 ACT 5/16 5/16 1/2 2 0.0600 45° 3 ZrN 8
    $55.66
  • A76081 ACT 1/4 1/4 1-1/4 3 0.0600 45° 3 Uncoated 100
    $61.73
  • A49887 ACT 3/4 3/4 2-1/2 5 45° 3 ZRN 56
    $394.36
  • A76577 ACT 1/4 1/4 1-1/4 3 0.0150 (1/64) 45° 3 ZrN 41
    $70.38
  • A76423 ACT 5/16 5/16 13/16 2-1/2 0.0200 45° 3 Uncoated 16
    $55.82
  • A76399 ACT 3/4 3/4 3 6 45° 3 ZrN 26
    $417.41
  • A76161 ACT 1/4 1/4 1-1/4 3 0.0150 (1/64) 45° 2 ZrN 76
    $70.38
  • A76578 ACT 1/4 1/4 1-1/4 3 0.0300 45° 3 ZrN 54
    $70.38
  • A76424 ACT 5/16 5/16 13/16 2-1/2 0.0300 45° 3 Uncoated 46
    $55.82
  • A76162 ACT 1/4 1/4 1-1/4 3 0.0300 45° 2 ZrN 74
    $70.38
  • A41128 ACT 1 1 1-1/4 3-1/2 45° 3 Uncoated 24
    $485.57
  • A76579 ACT 1/4 1/4 1-1/4 3 0.0600 45° 3 ZrN 64
    $70.38
  • A76425 ACT 5/16 5/16 13/16 2-1/2 0.0600 45° 3 Uncoated 14
    $55.82
  • A76163 ACT 1/4 1/4 1-1/4 3 0.0600 45° 2 ZrN 73
    $70.38
  • A71614 ACT 1 1 1-1/4 3-1/2 45° 3 ZRN 5
    $532.28
  • A76212 ACT 5/16 5/16 13/16 2-1/2 0.0200 45° 3 ZrN 9
    $66.13
  • A55452 ACT 1/4 1/4 1-1/4 3 0.02 45° 3 ZRN 15
    $66.46
  • A55424 ACT 1/4 1/4 1-1/4 3 0.02 45° 2 ZRN 19
    $66.46
  • A41209 ACT 1 1 1-3/4 4 45° 3 Uncoated 18
    $510.09
  • A76213 ACT 5/16 5/16 13/16 2-1/2 0.0300 45° 3 ZrN 12
    $66.13
  • A41141 ACT 5/16 5/16 1/2 2 .020 45° 3 Uncoated 100
    $41.76
  • A41087 ACT 5/16 5/16 1/2 2 .020 45° 2 Uncoated 100
    $41.44
  • A49860 ACT 1 1 1-3/4 4 45° 3 ZRN 10
    $536.85
  • A76372 ACT 5/16 5/16 1/2 2 0.0300 45° 2 Uncoated 100
    $41.44
  • A76214 ACT 5/16 5/16 13/16 2-1/2 0.0600 45° 3 ZrN 11
    $66.13
  • A76182 ACT 5/16 5/16 1/2 2 0.0300 45° 3 Uncoated 100
    $41.76
  • A49881 ACT 1 1 2-1/4 5 45° 3 Uncoated 100
    $630.45
  • A76639 ACT 5/16 5/16 1-3/8 3 0.0200 45° 3 Uncoated 10
    $88.76
  • A76373 ACT 5/16 5/16 1/2 2 0.0600 45° 2 Uncoated 100
    $41.44
  • A76183 ACT 5/16 5/16 1/2 2 0.0600 45° 3 Uncoated 100
    $41.76
  • A49888 ACT 1 1 2-1/4 5 45° 3 ZRN 11
    $659.88
  • A76640 ACT 5/16 5/16 1-3/8 3 0.0300 45° 3 Uncoated 32
    $88.76
  • A76264 ACT 5/16 5/16 1/2 2 0.0300 45° 2 ZrN 48
    $51.05
  • A75999 ACT 5/16 5/16 1/2 2 0.0300 45° 3 ZrN 59
    $51.42
  • A76641 ACT 5/16 5/16 1-3/8 3 0.0600 45° 3 Uncoated 15
    $88.76
  • A76265 ACT 5/16 5/16 1/2 2 0.0600 45° 2 ZrN 54
    $51.05
  • Total: items /

Adding your products to cart