Filter toolsClose filters ×

End Mills for Aluminum

View products ↓

Milling aluminum can be quite different from milling other materials like steel or plastics due to aluminum's unique properties. To achieve the best results when milling aluminum, it's important to use carbide end mills specifically designed for this material. Here are some characteristics that make certain carbide end mills better for milling aluminum compared to standard end mills:

 

Material Selection

Carbide end mills are the preferred choice for milling aluminum. Carbide is harder and more wear-resistant than high-speed steel (HSS), making it suitable for the high-speed machining often used with aluminum.

Flute Geometry

High Helix Angle: Carbide end mills designed for aluminum typically have a high helix angle (often 45 degrees or higher). This helps in efficient chip evacuation and reduces the risk of chip recutting, which can lead to heat buildup and tool wear.

Flute Design

Polished Flutes: Some aluminum-specific carbide end mills have polished or specially coated flutes to minimize built-up edge (BUE) and reduce the tendency of aluminum to stick to the tool.

Number of Flutes

Fewer Flutes:  Carbdie end mills with fewer flutes (typically two or three) are often preferred for aluminum machining. Fewer flutes allow for larger chip evacuation channels and can handle the softer, gummy nature of aluminum better.

Coatings

Choose the coating or finish recommended for the exact tool and aluminum alloy. Check the manufacturer’s application guidance before selecting a coated tool. (see additional coating details here)

Chip Breakers

Some carbide end mills designed for aluminum may have chip breakers or flutes with varying helix angles to help control chip formation and improve surface finish.

Rigidity and Stiffness

The carbide end mill and the milling machine should provide sufficient rigidity and stiffness to prevent vibrations, which can negatively impact surface finish and tool life.

Speeds and Feeds

Proper speeds and feeds are critical when milling aluminum. Aluminum-specific end mills are often optimized for higher speeds and chip loads suited to the material's properties.

Coolant or Lubrication

While aluminum is known for its ability to dissipate heat, using a coolant or lubrication can still help improve tool life and surface finish, especially in high-speed milling operations.

Cutter Geometry

Some carbide end mills designed for aluminum have specialized cutter geometries, such as variable helix or variable pitch designs, to minimize chatter and vibrations.

 

When selecting a carbide end mill for milling aluminum, it's essential to consider the specific requirements of your machining operation, including the type of aluminum alloy, cutting conditions, and desired surface finish. If you would like to discuss your application in more detail please reach out to us at 908-98-ATLAS or email us at Sales@atlascuttingtools.com

 

Compare three aluminum end mill configurations

Check diameter, cutting length, overall length, coating and corner geometry against your setup. These examples have different dimensions and geometries; they are not interchangeable substitutes.

Use the product specifications and manufacturer guidance to confirm the tool for your application.

  • Compare SKU Vendor Size (D1) Shank Diameter (D2) Flute Length (L2) Reach (L3) Neck Dia (D3) Overall Length (L1) Length Type Corner Radius (R) Included Angle Taper Angle Helix Angle Number of Flutes Weldon Flats Flats Coating In Stock Price Quantity
    A76572 ACT 1 1 1-3/4 4 0.0600 45° 3 ZrN 10
    $590.25
  • A76157 ACT 1 1 1-3/4 4 0.1250 (1/8) 45° 2 ZrN 7
    $590.25
  • A76119 ACT 1 1 2-1/4 5 0.0600 45° 3 ZrN 10
    $739.87
  • A76573 ACT 1 1 1-3/4 4 0.1250 (1/8) 45° 3 ZrN 11
    $590.25
  • A76120 ACT 1 1 2-1/4 5 0.1250 (1/8) 45° 3 ZrN 7
    $739.87
  • A55423 ACT 1 1 2-1/4 5 0.04 45° 2 Uncoated 22
    $675.27
  • A76253 ACT 1 1 2-1/4 5 0.0300 45° 2 Uncoated 16
    $675.27
  • A55444 ACT 1 1 1-3/4 4 0.04 45° 3 ZRN 7
    $428.87
  • A76254 ACT 1 1 2-1/4 5 0.0600 45° 2 Uncoated 28
    $675.27
  • A55451 ACT 1 1 2-1/4 5 0.04 45° 3 Uncoated 22
    $675.27
  • A76255 ACT 1 1 2-1/4 5 0.1250 (1/8) 45° 2 Uncoated 9
    $675.27
  • A75988 ACT 1 1 2-1/4 5 0.0300 45° 3 Uncoated 25
    $675.27
  • A76051 ACT 1 1 2-1/4 5 0.0300 45° 2 ZrN 6
    $725.53
  • A75989 ACT 1 1 2-1/4 5 0.0600 45° 3 Uncoated 16
    $675.27
  • A76052 ACT 1 1 2-1/4 5 0.0600 45° 2 ZrN 10
    $725.53
  • A75990 ACT 1 1 2-1/4 5 0.1250 (1/8) 45° 3 Uncoated 21
    $675.27
  • A76466 ACT 1 1 2-1/4 5 0.0300 45° 3 ZrN 7
    $725.53
  • A76053 ACT 1 1 2-1/4 5 0.1250 (1/8) 45° 2 ZrN 10
    $725.53
  • A76467 ACT 1 1 2-1/4 5 0.0600 45° 3 ZrN 6
    $725.53
  • A76468 ACT 1 1 2-1/4 5 0.1250 (1/8) 45° 3 ZrN 13
    $725.53
  • A55458 ACT 1 1 2-1/4 5 0.04 45° 3 ZRN 18
    $526.80
  • Total: items /

Adding your products to cart