End Mills for Aluminum

End Mills for Aluminum


Milling aluminum can be quite different from milling other materials like steel or plastics due to aluminum's unique properties. To achieve the best results when milling aluminum, it's important to use carbide end mills specifically designed for this material. Here are some characteristics that make certain carbide end mills better for milling aluminum compared to standard end mills:

 

Material Selection

Carbide end mills are the preferred choice for milling aluminum. Carbide is harder and more wear-resistant than high-speed steel (HSS), making it suitable for the high-speed machining often used with aluminum.

Flute Geometry

High Helix Angle: Carbide end mills designed for aluminum typically have a high helix angle (often 45 degrees or higher). This helps in efficient chip evacuation and reduces the risk of chip recutting, which can lead to heat buildup and tool wear.

Flute Design

Polished Flutes: Some aluminum-specific carbide end mills have polished or specially coated flutes to minimize built-up edge (BUE) and reduce the tendency of aluminum to stick to the tool.

Number of Flutes

Fewer Flutes:  Carbdie end mills with fewer flutes (typically two or three) are often preferred for aluminum machining. Fewer flutes allow for larger chip evacuation channels and can handle the softer, gummy nature of aluminum better.

Coatings

TiN, TiCN, ZRN or AlTiN Coatings: These coatings can enhance tool life and reduce friction during aluminum milling. AlTiN (Aluminum Titanium Nitride) coatings are particularly well-suited for aluminum due to their lubricity and heat resistance. (see additional coating details here)

Chip Breakers

Some carbide end mills designed for aluminum may have chip breakers or flutes with varying helix angles to help control chip formation and improve surface finish.

Rigidity and Stiffness

The carbide end mill and the milling machine should provide sufficient rigidity and stiffness to prevent vibrations, which can negatively impact surface finish and tool life.

Speeds and Feeds

Proper speeds and feeds are critical when milling aluminum. Aluminum-specific end mills are often optimized for higher speeds and chip loads suited to the material's properties.

Coolant or Lubrication

While aluminum is known for its ability to dissipate heat, using a coolant or lubrication can still help improve tool life and surface finish, especially in high-speed milling operations.

Cutter Geometry

Some carbide end mills designed for aluminum have specialized cutter geometries, such as variable helix or variable pitch designs, to minimize chatter and vibrations.

 

When selecting a carbide end mill for milling aluminum, it's essential to consider the specific requirements of your machining operation, including the type of aluminum alloy, cutting conditions, and desired surface finish. If you would like to discuss your application in more detail please reach out to us at 908-98-ATLAS or email us at Sales@atlascuttingtools.com

 

  • Size (D1) Shank Dia (D2) Flute Length (L2) OAL (L1) # of Flutes Coating Corner Radius (R) In Stock Sku Price Quantity
    1/8 1/8 1/4 1-1/2 3 Uncoated .010 55
    $10.22
  • 1/8 1/8 1/4 1-1/2 3 Uncoated 15
    $7.93
  • 1/8 1/8 1/4 1-1/2 2 Uncoated .010 77
    $10.22
  • 1/8 1/8 1/4 1-1/2 2 Uncoated 81
    $7.93
  • 1/8 1/8 1/4 1-1/2 3 ZRN .010 19
    $12.17
  • 1/8 1/8 1/4 1-1/2 3 ZRN 39
    $9.89
  • 1/8 1/8 1/4 1-1/2 2 ZRN .010 19
    $12.17
  • 1/8 1/8 1/4 1-1/2 2 ZRN 18
    $9.89
  • 1/8 1/8 1/2 1-1/2 3 Uncoated 0.02 25
    $10.79
  • 1/8 1/8 1/2 1-1/2 3 Uncoated Call
    $11.77
  • 1/8 1/8 1/2 1-1/2 2 Uncoated 0.01 38
    $10.79
  • 1/8 1/8 1/2 1-1/2 2 Uncoated 88
    $8.84
  • 1/8 1/8 1/2 1-1/2 3 ZRN 0.02 18
    $16.45
  • 1/8 1/8 1/2 1-1/2 3 ZRN 100
    $13.79
  • 1/8 1/8 1/2 1-1/2 2 ZRN 0.01 22
    $16.45
  • 1/8 1/8 1/2 1-1/2 2 ZRN 277
    $13.79
  • 1/8 1/8 3/4 2-1/4 3 Uncoated 0.02 100
    $19.28
  • 1/8 1/8 3/4 2-1/4 3 Uncoated 100
    $21.10
  • 1/8 1/8 3/4 2-1/4 2 Uncoated 0.01 100
    $19.28
  • 1/8 1/8 3/4 2-1/4 2 Uncoated 49
    $15.87
  • 1/8 1/8 3/4 2-1/4 3 ZRN 0.02 16
    $28.00
  • 1/8 1/8 3/4 2-1/4 3 ZRN 53
    $23.39
  • 1/8 1/8 3/4 2-1/4 2 ZRN 0.01 100
    $28.00
  • 1/8 1/8 3/4 2-1/4 2 ZRN 30
    $23.43
  • 3/16 3/16 3/8 2 3 Uncoated .010 100
    $15.41
  • 3/16 3/16 3/8 2 3 Uncoated 2
    $12.50
  • 3/16 3/16 3/8 2 2 Uncoated .010 100
    $15.41
  • 3/16 3/16 3/8 2 2 Uncoated 38
    $12.50
  • 3/16 3/16 3/8 2 3 ZRN .010 55
    $17.61
  • 3/16 3/16 3/8 2 3 ZRN 31
    $14.71
  • 3/16 3/16 3/8 2 2 ZRN .010 88
    $17.61
  • 3/16 3/16 3/8 2 2 ZRN 17
    $14.71
  • 3/16 3/16 5/8 2 3 Uncoated 0.02 16
    $15.10
  • 3/16 3/16 5/8 2 3 Uncoated 100
    $16.79
  • 3/16 3/16 5/8 2 2 Uncoated 0.01 75
    $15.10
  • 3/16 3/16 5/8 2 2 Uncoated 100
    $12.62
  • 3/16 3/16 5/8 2 3 ZRN 0.02 10
    $22.51
  • 3/16 3/16 5/8 2 3 ZRN 100
    $19.15
  • 3/16 3/16 5/8 2 2 ZRN 0.0 7
    $22.51
  • 3/16 3/16 5/8 2 2 ZRN 60
    $19.15
  • 3/16 3/16 3/4 2-1/2 3 Uncoated 0.02 100
    $22.26
  • 3/16 3/16 3/4 2-1/2 3 Uncoated 48
    $24.29
  • 3/16 3/16 3/4 2-1/2 2 Uncoated 0.01 100
    $22.26
  • 3/16 3/16 3/4 2-1/2 2 Uncoated 89
    $18.26
  • 3/16 3/16 3/4 2-1/2 3 ZRN 0.02 72
    $32.32
  • 3/16 3/16 3/4 2-1/2 3 ZRN 18
    $26.92
  • 3/16 3/16 3/4 2-1/2 2 ZRN 0.01 89
    $32.32
  • 3/16 3/16 3/4 2-1/2 2 ZRN 18
    $26.92
  • 1/4 1/4 1/2 2 3 Uncoated .020 85
    $22.02
  • 1/4 1/4 1/2 2 3 Uncoated 81
    $18.32
  • 1/4 1/4 1/2 2 2 Uncoated .020 100
    $22.02
  • 1/4 1/4 1/2 2 2 Uncoated 55
    $18.32
  • 1/4 1/4 1/2 2 3 ZRN .020 13
    $24.76
  • 1/4 1/4 1/2 2 3 ZRN 40
    $21.02
  • 1/4 1/4 1/2 2 2 ZRN .020 77
    $24.76
  • 1/4 1/4 1/2 2 2 ZRN 8
    $21.02
  • 1/4 1/4 3/4 2-1/2 3 Uncoated 0.02 16
    $20.09
  • 1/4 1/4 3/4 2-1/2 2 Uncoated 0.02 100
    $20.09
  • 1/4 1/4 3/4 2-1/2 3 Uncoated 100
    $23.66
  • 1/4 1/4 3/4 2-1/2 2 Uncoated 100
    $17.79
  • 1/4 1/4 3/4 2-1/2 3 ZRN 0.02 15
    $29.83
  • 1/4 1/4 3/4 2-1/2 2 ZRN 0.02 21
    $29.83
  • 1/4 1/4 3/4 2-1/2 3 ZRN 100
    $26.75
  • 1/4 1/4 3/4 2-1/2 2 ZRN 108
    $26.75
  • 1/4 1/4 1-1/4 3 3 Uncoated 0.02 33
    $28.52
  • 1/4 1/4 1-1/4 3 2 Uncoated 0.02 64
    $28.52
  • 1/4 1/4 1-1/4 3 3 Uncoated 53
    $33.52
  • 1/4 1/4 1-1/4 3 2 Uncoated 65
    $25.20
  • 1/4 1/4 1-1/4 3 3 ZRN 0.02 15
    $41.17
  • 1/4 1/4 1-1/4 3 2 ZRN 0.02 17
    $41.17
  • 1/4 1/4 1-1/4 3 3 ZRN 18
    $36.68
  • 1/4 1/4 1-1/4 3 2 ZRN 15
    $36.68
  • 5/16 5/16 1/2 2 3 Uncoated .020 100
    $25.80
  • 5/16 5/16 1/2 2 3 Uncoated 7
    $22.31
  • 5/16 5/16 1/2 2 2 Uncoated .020 100
    $25.63
  • 5/16 5/16 1/2 2 2 Uncoated 100
    $22.31
  • 5/16 5/16 1/2 2 3 ZRN .020 87
    $28.99
  • 5/16 5/16 1/2 2 3 ZRN 10
    $25.55
  • 5/16 5/16 1/2 2 2 ZRN .020 100
    $31.90
  • 5/16 5/16 1/2 2 2 ZRN 28
    $25.55
  • 5/16 5/16 13/16 2-1/2 3 Uncoated 0.02 100
    $23.87
  • 5/16 5/16 13/16 2-1/2 2 Uncoated 0.02 100
    $23.87
  • 5/16 5/16 13/16 2-1/2 3 Uncoated 49
    $28.05
  • 5/16 5/16 13/16 2-1/2 2 Uncoated 48
    $21.08
  • 5/16 5/16 13/16 2-1/2 3 ZRN 0.02 40
    $35.43
  • 5/16 5/16 13/16 2-1/2 2 ZRN 0.02 19
    $35.43
  • 5/16 5/16 13/16 2-1/2 3 ZRN 24
    $31.74
  • 5/16 5/16 13/16 2-1/2 2 ZRN 53
    $31.74
  • 5/16 5/16 1-3/8 3 3 Uncoated 0.02 100
    $39.12
  • 5/16 5/16 1-3/8 3 2 Uncoated 0.02 100
    $39.12
  • 5/16 5/16 1-3/8 3 3 Uncoated 23
    $46.10
  • 5/16 5/16 1-3/8 3 2 Uncoated 48
    $34.60
  • 5/16 5/16 1-3/8 3 3 ZRN 0.02 7
    $56.00
  • 5/16 5/16 1-3/8 3 2 ZRN 0.02 21
    $56.00
  • 5/16 5/16 1-3/8 3 3 ZRN 23
    $49.93
  • 5/16 5/16 1-3/8 3 2 ZRN 16
    $49.93
  • 3/8 3/8 5/8 2 3 Uncoated .020 100
    $27.25
  • 3/8 3/8 5/8 2 3 Uncoated 36
    $24.09
  • 3/8 3/8 5/8 2 2 Uncoated .020 100
    $27.08
  • 3/8 3/8 5/8 2 2 Uncoated 58
    $24.09
  • Total: items /

Adding your products to cart