Speeds & Feeds

Published starting values for selected Atlas tools. Choose the exact tool series and SKU before using a chart.

Swipe the table horizontally to see every column.

Calculation details & chart limits

Imperial units: RPM = SFM × 12 ÷ (π × tool diameter in inches). For milling, feed in inches/minute = RPM × number of flutes × inches/tooth (IPT). For drilling, feed in inches/minute = RPM × inches/revolution (IPR).

Hardness is shown in the scale published in the chart: HRC, BHN or HRF. No hardness conversion or interpolation between tool-diameter bands is applied. Coating, depth, engagement and coolant changes require matching application guidance; there is no automatic coating multiplier.

Confirm the tool series, coating, geometry and dimensions match the chart. Use the lower applicable tool or machine speed limit. Charts are starting guidance; actual setup and cutting conditions may require adjustment.