1/4" Dia, 1-7/16" OAL, End Mill 2-Flute SE CC STUB SCREW MACH HSS , SGS-8

SKU: A64061

Size
1/4
Shank Diameter
1/4
Flute Length
3/8
Overall Length
1-7/16
Number of Flutes
2
Style
Square End
Material
HSS
Coating
Uncoated
Package Qty
1
Helix Angle
30°
Availability
Available to order
$13.29
Technical guidance

Speeds & feeds

Choose your workpiece material to see manufacturer starting values for this tool.

Baseline for this uncoated HSS tool: radial depth 25% of cutting diameter (0.0625″), maximum axial depth 1.5× diameter (0.375″). For slotting, reduce chip load 20%; for slots deeper than half the diameter, the chart specifies a 50% reduction. These baseline values do not include slotting adjustments.

Coating & flute guidance

Coating to consider

Flute count & geometry

Guidance for comparing tool designs. The values above remain the baseline for this uncoated HSS, two-flute tool. Use the selected replacement tool’s own cutting data; more flutes do not mean a proportional feed increase.

Compare published material values
MaterialHardnessSFMChip load
in/tooth
Calculation details

Calculated for a 0.25000″ cutting diameter and two flutes.

RPM = SFM × 12 ÷ (π × diameter). Feed (in/min) = RPM × 2 flutes × chip load (in/tooth). Calculated ranges pair the lower bounds and upper bounds; they are rounded for display. No coating or slotting adjustment is applied. BHN is Brinell hardness; HRF is Rockwell F. Hardness values describe the published workpiece condition, not the cutting tool. No hardness-scale conversion is performed.