Before ordering a tap: prepare a clear tooling request
Choosing the right tap starts with the thread requirements, hole dimensions and material you need to machine. Collect the details below before comparing catalog options or asking Atlas for help. Leave uncertain fields open rather than filling them with a guess.
Keep the job requirement and candidate tool separate
On a narrow screen, scroll the comparison table sideways to read every column.
| Information | Job requirement | Candidate tool or question |
|---|---|---|
| Thread specification | Size, pitch or threads per inch, thread direction and required class from the drawing. | Exact tap designation and stated limit, recorded separately from the finished-thread requirement. |
| Hole geometry | Blind or through hole, available hole depth and required full-thread depth. Identify the depth reference used on the drawing. | Published chamfer designation and any unanswered question about the space available. |
| Tool design | Any cutting or forming process specified for the job; mark it unknown if not established. | Flute/point style and chamfer lead in separate fields. Do not infer a complete design from one label. |
| Workpiece and surface option | Material grade and known hardness or condition. | Exact tool material and coating/finish designation, rather than a color description. |
| Setup | Machine, holding and coolant details relevant to the review. | Any known restriction or compatibility question about the candidate. |
| Ordering reference | Quantity, requested schedule and drawing revision. | Atlas SKU or previous job reference, with any changed requirement clearly identified. |

Record full-thread depth and available hole depth separately. State whether a drilled depth is to the drill point or to the full-diameter portion. Space is needed below the full threads for the actual tap lead and required clearance; these details do not calculate the required clearance or drilling depth.
Make the unresolved question specific
For example: “The drawing specifies the thread requirement, but I need help checking the candidate tap’s limit,” or “The full-thread depth is fixed; please review the chamfer and available hole space.” These describe what needs review without assuming a tool is suitable.
A chamfer description is not a complete tool specification. Keep it alongside the flute/point design and other fields so the request does not collapse several decisions into a single “tap style” label.
Use this enquiry outline
Copy the headings below into your message and fill only what you know. “Not yet confirmed” is more useful than a guessed specification.
- Drawing and revision: [reference]
- Thread requirement: [size, pitch/TPI, direction and class]
- Hole: [blind/through, required full-thread depth and available depth, with units and depth reference]
- Workpiece: [material grade, known hardness/condition]
- Setup: [machine, holder and coolant information]
- Candidate tap: [Atlas SKU, published design, chamfer and limit, if known]
- Quantity and requested schedule: [details]
- Question to resolve: [the requirement or field you need checked]
If you are repeating an earlier order, identify what has changed since that job. A previous purchase reference helps locate the item; it does not establish suitability for a changed drawing, material or setup.
Send the details through the existing contact route
Use the Atlas contact page and include the details in your message. If drawings or photos are available, mention them and ask the team how to share them; the contact page does not provide a file upload.
Keep the candidate SKU with your notes when browsing taps. Use Coatings & Finishes as reference information, while retaining the exact product designation in your enquiry.
Recent Posts
-
Before ordering a tap: prepare a clear tooling request
Choosing the right tap starts with the thread requirements, hole dimensions and material you need to …Nov 10th 2026 -
How to read an end mill product specification
An end mill’s diameter, flute length, shank size and coating all matter when comparing tools for a j …Nov 10th 2026