Cobalt Ball End Mills
Cobalt ball end mills carry a fully rounded tip rather than a flat one, so the cutting edge follows a curve instead of leaving a flat floor and a sharp corner. That makes them the tool for 3D contouring, die and mold work, and any surface that is not flat. Stocked in 2 flute and 4 and 6 flute fractional ranges, uncoated or in TiALN, TiCN and TiN.
Ball End vs. Square End: Use a ball end when the finished surface is curved, filleted or three-dimensional. For flat floors, slots and square shoulders, the cobalt square end range is the correct choice.
Flute Count: The 2 flute range clears chips more freely and is the better choice for deeper contour passes and roughing in softer alloys. The 4 and 6 flute range leaves a finer scallop between passes, which suits finishing work and harder materials.
Helix Angle: The 2 flute range is stocked at both 30° and 40° helix — the higher angle shears more gradually for a smoother finish, the lower angle is more rigid under load. The 4 and 6 flute range is 30° throughout.
Why Cobalt: Cobalt holds its edge at higher temperatures than plain high speed steel, so these tools tolerate faster speeds and tougher materials — stainless, titanium and hardened alloys. They remain tougher and less prone to chipping than carbide, which makes them a safer choice in interrupted cuts, older machines, or setups that are not perfectly rigid.
-
Compare SKU Vendor Size (D1) Shank Diameter (D2) Flute Length (L2) Reach (L3) Overall Length (L1) Length Type Corner Radius (R) Included Angle Taper Angle Helix Angle Number of Flutes Weldon Flats Flats Coating In Stock Price Quantity A62946 HTC Tool 1-1/4 1-1/4 2 4-1/2 30° 6 TiCN Available to Order* $134.13 -
A62947 HTC Tool 1-1/4 1-1/4 2 4-1/2 30° 6 TiALN Available to Order* $138.12 -
A62393 HTC Tool 1-1/2 1-1/4 2 4-1/2 30° 6 Uncoated Available to Order* $149.65 -
A62396 HTC Tool 1-1/2 1-1/4 2 4-1/2 30° 6 TiN Available to Order* $168.78 -
A62394 HTC Tool 1-1/2 1-1/4 2 4-1/2 30° 6 TiCN Available to Order* $178.33 -
A65290 HTC Tool 3/4 3/4 1-1/2 8-1/4 40° 2 TiCN Available to Order* $140.25 -
A65291 HTC Tool 3/4 3/4 1-1/2 8-1/4 40° 2 TiALN Available to Order* $144.22 -
A65292 HTC Tool 3/4 3/4 1-1/2 8-1/4 40° 2 TiN Available to Order* $132.31 -
A60205 HTC Tool 3/4 5/8 1-1/4 7-1/8 40° 2 Uncoated Available to Order* $137.60 -
A65294 HTC Tool 3/4 5/8 1-1/4 7-1/8 40° 2 TiCN Available to Order* $141.14 -
A65295 HTC Tool 3/4 5/8 1-1/4 7-1/8 40° 2 TiALN Available to Order* $130.57 -
A67171 HTC Tool 7/8 3/4 1-1/2 8-1/4 40° 2 TiN Available to Order* $145.54 -
A67172 HTC Tool 7/8 3/4 1-1/2 8-1/4 40° 2 TiCN Available to Order* $171.62 -
A67173 HTC Tool 7/8 3/4 1-1/2 8-1/4 40° 2 TiALN Available to Order* $175.97 -
A60311 HTC Tool 7/8 3/4 1-1/2 8-1/4 40° 2 TiN Available to Order* $162.94 -
A62934 HTC Tool 1-1/4 1-1/4 2-1/2 5 30° 2 TiCN Available to Order* $129.80 -
A62935 HTC Tool 1-1/4 1-1/4 2-1/2 5 30° 2 TiALN Available to Order* $134.21 -
A62385 HTC Tool 1-1/2 1-1/4 2-1/2 5 30° 2 Uncoated Available to Order* $139.81 -
A62386 HTC Tool 1-1/2 1-1/4 2-1/2 5 30° 2 TiCN Available to Order* $171.10 -
A62387 HTC Tool 1-1/2 1-1/4 2-1/2 5 30° 2 TiALN Available to Order* $176.28 -
A62388 HTC Tool 1-1/2 1-1/4 2-1/2 5 30° 2 TiN Available to Order* $160.65
* Lead times can vary from 1–10 business days. Call (908) 98-ATLAS or email sales@atlascuttingtools.com for details.